GBC Fusion Punch II with Offset and Bypass Stacker
Install Planning
Device Configurations
Space Requirements
This Install Planning guide will help you prepare for the
installation of the GBC Fusion Punch II.
The GBC Fusion Punch II components are:
•
GBC Fusion Punch II
•
Offset Stacker
•
Bypass Stacker, optional (not available with iGen3)
Note: The GBC Fusion Punch II with dual Stacker is currently
NOT supported with the Xerox iGen3
The space requirements diagram provides machine footprint as
well as the overall operating and maintenance area.
In addition to the diagram below, there should be a minimum of
78 inches (1,981mm) clearance from the floor to the nearest
overhead obstruction.
Power
36 inches
(914 mm)
GBC Fusion Punch II
54 inches
(1372 mm)
36 inches
(914 mm)
105 inches
(2668 mm)
1-2
®
Digital Production Press.
Offset
Stacker
24 inches
(610 mm)
27 inches
(686 mm)
104 inches
(2641 mm)