PREPARING THE UNIT FOR INSTALLATION
IMPORTANT: Cut the strap securing the compressor shipping
support bracket and remove the strap and shipping bracket�
See FIGURE 7�
1. Clip off and remove the plastic straps securing the
compressor to the shipping bracket�
2. Remove the two screws securing the shipping bracket to
the housing. Remove and discard the shipping bracket, and
reinstall the two screws in the dehumidifier.
FIGURE 7: PREPARING THE UNIT FOR INSTALLATION
B
D
A. PLASTIC STRAP
B. SCREWS
C. SHIPPING BRACKET
D. ON/OFF POWER SWITCH (SELECT MODELS)
6
English
INSTALLING THE DUCT COLLARS
Use the screws in the parts bag to attach the duct collars to
the inlet and outlet of the dehumidifier.
FIGURE 8: INSTALL DUCT COLLARS
A
C
A. INLET DUCT COLLAR
B. OUTLET DUCT COLLAR
A
90-2302
B
90-2308
90-2306