Preparing The Unit For Installation - Aprilaire E130 Installation & Owner's Manual

PREPARING THE UNIT FOR INSTALLATION

IMPORTANT: Cut the strap securing the compressor shipping
support bracket and remove the strap and shipping bracket
(see FIGURE 7) .
1. Clip off and remove the plastic straps securing the
compressor to the shipping bracket.
2. Remove the two screws securing the shipping bracket to
the housing. Remove and discard the shipping bracket, and
reinstall the two screws in the dehumidifier.
6
FIGURE 7: PREPARING THE UNIT FOR INSTALLATION
B
D
A. PLASTIC STRAP
B. SCREWS
C. SHIPPING BRACKET
D. ON/OFF POWER SWITCH
(SELECT MODELS)
C
A
90-2013
90-2013