Table of Contents
Advertisement
DRAIN INSTALLATION
CAUTION
Do not damage drain cover. The drain cover is a critical feature of the dehumidifier drain management system.
WARNING
Running the dehumidifier without the drain cover can lead to condensate leaks.
The drain outlet on the dehumidifier can be hard piped using a 3/4" PVC Slip x 3/4" MNPT fitting and 3/4" nominal drain tubing or the provided 3/4"
MNPT x 3/4" hose barb fitting and 3/4" clear PVC tubing can be used to drain the dehumidifier� Always maintain a constant downward slope from the
dehumidifier to the drain and do not allow soft tubing to curl up which may result in air lock�
Note: PTFE thread seal tape is recommended for the threaded connection and hand tighten only� If hard pipe is used, PVC primer and cement is
recommended for the slip fit connection� Remove drain insert before priming and gluing in the PVC fitting� Replace drain insert after PVC glue has
fully dried�
FIGURE 3 – DRAIN INSERT
DRAIN INSERT
90-2607
4 English
Hide quick links:
Advertisement
Table of Contents
