Specifications; Set Up Dehumidifier For Installation - Aprilaire 1870 Installation Instructions Manual

SPECIFICATIONS

Weight
Capacity
AHAM DH-1-2008 80°F, 60% RH Conditions
Power
115 VAC, Single Phase, 60Hz
Dehumidifier Inlet Air Conditions
Filter
Airflow
0.7" w.c. is maximum design external static pressure.
The dehumidifier is not designed to prevent window condensation in winter . Indoor humidity levels must typically get lower than what
dehumidifiers can achieve to address window condensation . Use ventilation to lower indoor humidity levels in winter .

SET UP DEHUMIDIFIER FOR INSTALLATION

IMPORTANT:
Cut the strap securing the compressor
shipping support bracket and remove the strap and shipping bracket .
See Figure 1 .
Model 1870 & 1870W
130 pints per day @ 310 CFM
8 .3A operating current
Dehumidification: 50°F – 104°F, 40°F dew point minimum
Ventilation: 40°F – 140°F, 0%RH – 99%RH (non-condensing)
External Static Pressure ("w.c.)
0 .0
0 .2
0 .4
0 .6
FIGURE 1 – Remove Shipping Bracket
113 lbs .
MERV 8, washable
Airflow (CFM)
310
270
225
175
REMOVE SCREWS (2)
DISCARD SHIPPING BRACKET
REINSTALL SCREWS (2)
CLIP OFF
PLASTIC
STRAP
90-2013
3