Xerox WorkCentre Pro 65 Network Installation Manual page 8

Enable Universal Serial Bus Printing
Follow the steps below to make the printer a more complete part of your business process.
1.
Verify the USB Print Kit has been installed and the USB Printer Port has been enabled by printing a
Configuration Report. See System Administration Guide Supplement for details on enabling the USB port.
2.
Connect your printer to a PC with a standard USB peripheral cable. The PC will detect the USB device. If
drivers are already installed, select the proper print driver.
If the drivers are not installed, the system will ask to install printer drivers. Use the Printer Driver CD to
install the proper print driver.
604P14400
8