Firepower MST 180i
2.06 User Responsibility
This equipment will perform as per the information contained herein when installed, operated, maintained and repaired in
accordance with the instructions provided. This equipment must be checked periodically. Defective equipment (including
welding leads) should not be used. Parts that are broken, missing, plainly worn, distorted or contaminated, should be replaced
immediately. Should such repairs or replacements become necessary, it is recommended that such repairs be carried out
by appropriately qualified persons approved by Firepower. Advice in this regard can be obtained by contacting an Accredited
Firepower Distributor.
This equipment or any of its parts should not be altered from standard specification without prior written approval of Fire-
power. The user of this equipment shall have the sole responsibility for any malfunction which results from improper use or
unauthorized modification from standard specification, faulty maintenance, damage or improper repair by anyone other than
appropriately qualified persons approved by Firepower.
2.07 Firepower MST 180i Portable System Package (Part No. 1444-0871)
INTRODUCTION
2-2
Manual 0-5339