The Following Customer Issues Were Resolved In 12.0 B 256 - Xerox 6030 Release Note

Issue Description
SPAR# 624754302
– Unable to
download large
Account Database to
Accxes
9.6 The following customer issues were resolved
in 12.0 b 256
Issue Description
SPAR# 491325836 -
CGM rendering
issue with arc
command
SPAR# 340345313
– PDF fonts not
printed correctly
SPAR# 57572027 –
Stamps and Labels
not rotating with
document.
SPAR# 83758448
and SPAR#
271039530 – fine
line corrupted on
copy.
CGM File Failure
Scanner Pause
Concurrency
Failures
Occasional blank
prints on the 510
SPAR #098172954
– check plot setting
not sticking
Some Cals files
Page 21
Problem
New http interface in 12.0
would only support a certain
number of bytes for the
Accounting database.
Problem
Certain arcs which were
used to define very small
segments (<3 pixels) were
being misinterpreted as
complete circles.
Certain fonts would be
printed as small black
squares
The position of Stamps and
Labels was not properly
rotated when a document
had to be rotated for folding.
When rotating and reducing
Normal mode copies with
pixel preservation enabled
some scan lines were
shifted up to 1mm on the
image.
CGM File could crash YKE
controller
Scanner could periodically
stop responding.
Periodic scanner/printer
failures while scanning and
printing simultaneously.
Occasionally while scanning
and printing a blank page
was produced.
The check plot setting would
not be remembered when
saving the default template.
Certain Cals files in earlier
Resolution
The database is handled in a
chunked mode to handle the
largest databases
Resolution
Resolution for handling the
points of CGM arcs was
increased to resolve the
points correctly.
Adobe provided a code
change to the rendering
engine to address this.
Folding rotation is now taken
into consideration when
placing stamps and labels.
Pixel preservation now treats
all lines in the same manner
to ensure that placement is
consistent across the paper.
Fixed
Scanner communication
code fixed. Task priority
adjusted.
Improved system disk
access; Improved system
task priorities.
Handling of the printer
interface for 510 was
enhanced to eliminate the
race condition causing the
blank pages.
The check plot setting was
added to the job template list
and is now saved.
The automatic Format