Xerox Document Centre 50 Installation Manual page 84

4
Click Connectivity + Protocols + AppleTalk in the Properties tab menu
to view current AppleTalk information.
You may need to scroll to view all of the available information.
5
Review and edit fields, as desired.
6
Click Apply New Settings if any changes were made.
7
Provide a User Name and Password when prompted. (The default User
Name is Admin with a capital "A" and the default Password is 11111.)
8
Power off and power on the copier/printer. Allow at least 30 seconds
between powering off and powering on the printer. A Configuration
Report will print in approximately 5 minutes. The information on the
Configuration Report can be very helpful in completing the network
installation and troubleshooting problems with your copier/printer.
9
Continue with Step 2 Print a Test Page.
5-4 AppleTalk Network Installation