Using Centreware Printer Admin Services; Before You Start - Xerox Document Centre 50 Installation Manual

Before You Start

1
Either the CentreWare Printer Admin Services or CentreWare Internet
Services network software provided with the copier/printer will be used
during this procedure to customize the printer network connectivity
settings.
Determine now which CentreWare network software you will use to
perform this task. Refer to Chapter 2 Network Software for information on
installing and using CentreWare Printer Admin Services and CentreWare
Internet Services. This information will assist you in deciding which
software to use.
2
There are several items that must be provided prior to starting the
installation procedure. These items serve as a checklist for each TCP/IP
installation environment.
















6-2 TCP/IP Network Installation
Print Service - You must configure the LPR daemon that you will be
printing through.
Printer Type - You must configure the print daemon on the server to
account for support of TEXT (ASCII) or RAW (PostScript) data.
Address Resolution - You must have STATIC or DHCP assigned.
Host Name - You must provide a DNS or local Host Name.
Subnet Mask - You must provide a Subnet Mask for the network to
which your printer is currently connected.
Default Gateway - You must provide the default Gateway Address
where your printer is located (through which packets are forwarded to
other networks or subnets).
Frame Type
IP Address