Xerox Document Centre 50 Installation Manual page 28

Installing Printer Admin Services
Use the Windows Install/Remove Programs feature to install Printer Admin
Services.
Note:
Both the Printer Admin Services program and Microsoft Windows Color
Calibration Utilities are installed using this procedure.
To install Printer Admin Services:
1
Insert the Xerox Document Centre ColorSeries 50 Network Software CD-
ROM in the workstation CD-ROM drive.
2
At the desktop, select Start > Settings > Control Panel.
3
Double-click Add/Remove Programs.
4
Click Install to start the Install Program Wizard.
5
Click Next. Click Browse to open the Browse dialog. Browse to the
location of the Xerox Document Centre ColorSeries 50 Network Software
CD-ROM. On the CD-ROM, double-click Client > Setup.
6
Double-click Setup and click Open. The installation path is displayed in
the Command Line field.
7
Click Finish. The Printer Admin Services installation program will start.
8
On the Welcome dialog, click Next.
9
Click Yes to accept the license agreement.
10
Enter your name and company information and click Next. Click Next to
accept the default destination folder.
11
Select the desired installation component(s) (Printer Admin Services and
Color Calibration Utility) and click Next.
12
Click Next to accept the default Program folder. The selected components
will be installed.
13
Click Finish.
The installation is complete.
2-4 Network Software