Xerox Document Centre 50 Installation Manual page 77

4
Click Connectivity + Protocols + SMB in the Properties tab menu to
view current SMB information. You may need to scroll to view all of the
available information.
5
Be sure to enter the Workgroup/Domain name and the SMB Name.
Review and edit any additional fields, as desired.
6
If you are using IP, continue with Step 7. If you are not using IP, skip to
Step 9.
7
Click Connectivity + Protocols + TCP/IP in the Properties tab menu to
view current TCP/IP information.
8
Make sure that the IP Address, Host Name, Subnet Mask, and Gateway
Address are set to the correct values.
Step 2. Customize Printer Connectivity Settings 4-11