Settings; Printer Driver Settings - Xerox CopyCentre 133 User Manual

Settings

Memory - Specifies the amount of printer memory.
Hard Disk - Click the checkbox on or off to indicate whether or not a Hard Disk is
installed on the machine.
Tray Options - Sets the tray installed on the machine.
When [2-Tray Unit] is selected, Tray 3 and Tray 4 can be used.
When [2-Tray Unit (High Capacity)] is selected, Tray 3 and Tray 4 can be used as the
high capacity feeder.
NOTE: This item is displayed in Mac OS X only.
Finisher - Click the checkbox on or off to indicate whether or not a Finisher is installed
on the machine.
Paper Size Setting - Specifies the paper size group for different areas to enable the
selection of paper size common to that location.
Switch Paper Size (8K/16K) - Indicate your language preference to enable the set of
8K and 16K paper size that is best suited to your needs.

Printer Driver Settings

This section describes Printer Specific Options, used to set the printer driver.
1.
On the File menu of the application, click [Print].
The Print dialog box appears.
2.
Select [Printer Specific Options].
Xerox WorkCentre/WorkCentre Pro 123/128/133 PostScript® User Guide
5 Operation on Macintosh Computers
47