Configuration Tab Settings; Settings - Xerox CopyCentre 133 User Manual

4 Operation with Windows 2000, Windows XP and Windows Server 2003

Configuration Tab Settings

This section describes the settings of the Configuration tab.
NOTE: You can restore defaults by clicking [Restore Defaults].

Settings

Account Mode - Specifies if all users or only System Administrators can change
authentication related settings.
Detailed User Settings - Sets the authentication information.
Use Default User Settings - The values set in this feature are used as the
authentication parameters.
– Specify Job Owner Name - Select how to specify User ID.
– Job Owner Name - Enter a User ID.
– Password - Enter the Password for the User ID.
– Account ID - Enter an Account ID.
– Billing ID - Enter a User ID for Charge Print.
– Password - Enter the Password for the Billing ID.
Prompt User for Settings - Select this feature to display the [Enter User Details]
dialog-box each time you start printing. The user is then required to enter
authentication information such as their User ID.
– Display Previous User Details - Check the box to store the user details entered
in the [Enter User Details] dialog-box, and display the details in the box as a
default next time.
32 Xerox WorkCentre/WorkCentre Pro 123/128/133 PostScript® User Guide