Job Type - Xerox CopyCentre 133 User Manual

4 Operation with Windows 2000, Windows XP and Windows Server 2003

Job Type

You can specify the print function for Secure Print, Sample Print, and Delayed Print.
Secure Print temporarily stores print jobs in the printer, and then prints them when print
instructions are received from the control panel.
Sample Print outputs only one copy when multiple copies are specified. If there is no
problem, the remaining sets can be printed.
If there is no problem, the remaining sets are printed.
Delayed Print temporarily stores print jobs in the printer, and then prints them at the
scheduled time.
To use Secure Print, Sample Print, or Delayed Print feature, input the User ID and
password for Print Type in the Configuration tab. The password entered appears as
asterisks(*).
Normal Print - Select when you do not want to output secure prints, sample prints, or
delayed prints.
Secure Print - Select when you want to output secure prints.
Sample Print - Select when you want to output sample prints.
NOTE: The Collated setting must be selected in the Page Setup tab when using Print
Type.
Delayed Print - Select when you want to output delayed prints.
See the On-line Help for details on the operation of the printer.
User ID - Displays the User ID for Job Type. The user ID displayed is the User ID
specified on the Configuration tab. This option can only be selected when the setting
on the Configuration tab has been completed. This is a display-only item and cannot
be changed here.
Password - Displays the password for Secure Print as specified in the Configuration
tab. Each digit entered appears as an asterisk (*). This option can only be selected
when the setting on the Configuration tab has been completed. This is a display-only
item and cannot be changed here.
Retrieve Document Name - Select the method for specifying the document name. If
you have selected Auto Retrieve, the valid document name can be up to 24
alphanumeric characters can be specified.
Document Name - When "Enter Document Name" is selected in the Retrieve
Document Name list, a document name up to 24 alphanumeric characters.
Start Print Time - Specifies the time that a Delayed Print job will be printed. Place the
cursor in the hour or minute box and press the up or down triangle to specify the start
time. You can also set the time by entering the time directly into in the boxes. The
default setting is 00:00.
36 Xerox WorkCentre/WorkCentre Pro 123/128/133 PostScript® User Guide