Xerox CopyCentre 133 User Manual page 42

5 Operation on Macintosh Computers
(2) Select your printer model in the list, then click [Select].
The PPD file for this machine is set.
5.
Click [Configure] to set the options.
See Options on page 45 for details about the options.
NOTE: You can change the print settings after you install the printer driver.
NOTE: To use the options, it is necessary to set Configure. Always set this according
to the configuration of your machine. Also, Installable Options will usually be set
automatically according to the bi-directional communications of this machine. You do
not have to change the settings.
6.
Click [OK]. Click [OK] once more in the screen displayed.
7.
Close the Chooser.
42 Xerox WorkCentre/WorkCentre Pro 123/128/133 PostScript® User Guide