PICARRO G2302 User Manual page 7

CAUTION: The inlet gas connector on the back panel, and its
immediate vicinity, runs hot during operation of the analyzer. Take
care when connecting gas lines or working at the rear of the
instrument to wear protective gloves or avoid contact with these
surfaces.
CAUTION: The analyzer contains HOT SURFACES and utilizes
HIGH VOLTAGES inside the instrument. There are no user
serviceable components except the filter within the analyzer and so
you should not open the analyzer except to replace the filter. Do not
open any enclosures within the analyzer.
CAUTION: Some of the analyzer components are heavy. To avoid
injury, please use proper lifting procedure when moving or installing
the equipment.
NOTE: Although the analyzer components can be optionally
configured for rack mounting, they require supports in the rack, such
as a shelf or side L-brackets, and cannot be safely supported by the
front panel bolts alone.
NOTE: The Picarro Analyzer contains no user serviceable
components except the particulate filter in the analyzer and the
external vacuum pump. Do not attempt repairs; instead, report all
problems to Picarro.
Please contact Picarro if you have any questions regarding the safe operation of
this equipment. Refer to the appropriate section within this document relating to
pump and filter replacement procedures.
Picarro G2302 Analyzer User's Guide
Rev. B 1/14/11 7