Table of Contents
Advertisement
Dialup
The DIALUP section is used if a dial-up connection to the Internet needs
to be established when the program runs. If the section does not exist, a
permanent connection is assumed to be available for carrying out the
other tasks specified in the initialization file. The ConnectionName key
specifies the name of the dial-up connection to use, as listed under
Network Connections in the Control Panel. The values of the keys
Username, Password and Number are used to make the connection.
Example of "RemoteAccess.ini" File
[LOGGING]
Logfile=c:/temp/RemoteAccessLog
[NTP]
Server1=time-a.nist.gov
Server2=time-b.nist.gov
Server3=time-a.timefreq.bldrdoc.gov
Server4=time-b.timefreq.bldrdoc.gov
Server5=time-c.timefreq.bldrdoc.gov
Server6=time.nist.gov
Server7=time-nw.nist.gov
UpdateClock=1
[DIALUP]
ConnectionName=Picarro Dialup Access
Username=user
Password=password
Number=14085551212
[EMAIL]
Server=smtp.servername.org
Directory=c:/picarro/mailbox
From=instrument@picarro.com
To1=recipient1@site1.com
To2=recipient2@site2.com
Subject=CRDS data from Silverstone instrument
UseAuthentication=0
Picarro G2302 Analyzer User's Guide
Rev. B 1/14/11
34
Advertisement
Table of Contents
