PICARRO G2302 User Manual page 40

Installing the new filter:
8. Note: When re-attaching 1/4" Swagelok fittings, the nut should be
hand-tightened and then turned an additional 1/8 of a turn using a
wrench.
9. Using the 9/16" and 11/16" wrenches, remove the filter from its
packaging and attach it to the bulkhead fitting. The arrow on the filter
needs to point away from the bulkhead fitting.
10.Using the 9/16" and 11/16" wrenches, reposition the filter and bulkhead
fitting, and reattach to the tube section.
Picarro G2302 Analyzer User's Guide
Rev. B 1/14/11
Filter removed and separated from bulkhead fitting
New filter attached to bulkhead fitting
40