Table of Contents
Advertisement
Figure 2 - Layout of the Picarro analyzer GUI, G2000 series. A full explanation of the GUI
functions can be found in Appendix B
Data will be saved automatically once the analyzer starts to produce data. The
data in the GUI is the continuous real time read out from the analyzer. A user
relevant
subset
of
this
data
is
stored
in
C:\Userdata\DataLog_User
\YYYY\MM\DD, where Y=year, M=month, D=day. Further details can be found
under the file management section in Appendix B. Files in \DataLog_Sync are
sampled at even time intervals, whereas those in \DataLog_User are not.
In order to measure discrete samples (such as individual gas bags) or from
multiple locations (when switching valves draw in ambient air from different
heights) a separate software window (coordinator) is used to control the sample
source and match the corresponding real time read out with the sample source.
Depending on system configuration, coordinator programs may not be included.
Picarro G2302 Analyzer User's Guide
Rev. B 1/14/11
14
Advertisement
Table of Contents
