Table of Contents
Advertisement
5. Replace the light bulb with one of the same
type (40 W).
6. Refit the cover. Ensure the moulded part of
the glass (A) is facing the door.
7. Press the cover completely down so that it
attaches perfectly to the bulb support.
INSTALLATION
The appliance must be installed by a
qualified technician and according to
the regulations in force.
Positioning
See General safety instructions.
Depending on the type of installation, this
appliance belongs to classes:
Class 1
Class 2 - subclass 1
The appliance can be placed against walls that
are higher than the work surface, at a minimum
distance of X mm from the side of the appliance.
Any wall units installed above the appliance's
worktop must be positioned at least Y mm from
66 - INSTALLATION
Free-standing
Built-in
Replacing the interior light bulb (auxiliary
oven)
Power voltage
Danger of electrocution
• Unplug the appliance.
• Use protective gloves.
1. Unscrew the protective cover A by turning it
anti-clockwise.
2. Replace the bulb B with one of the same
type (25 W). Use only oven bulbs (T
300°C).
3. Reinstall the protective cover A.
it.
X
Y
If a hood is installed above the
appliance, refer to the hood instructions
manual to make sure the correct
clearance is left.
150 mm
750 mm
91477A753/C
Advertisement
Table of Contents
