Table of Contents
Advertisement
DISTINCTIVE RINGING
1
Press the keys shown at left. "OPTION
Rune TON
SETTING" will appear in the display.
Press the keys shown at left. "DISTINC-
TIVE RING" will appear in the display.
3
Select a ringing pattern by entering the
appropriate number ("1" to "5" as shown
(Example)
in the list on the previous page).
4
Press the STOP key.
Distinctive ringing in TAD mode
You can also use distinctive ringing with the built-in answering machine. By tuming
on the TAD distinctive ringing setting as shown on the following page, each ringing
pattem will be assigned to a message box as follows when the reception mode of
the fax is set to TAD.
STANDARD PATTERN:
GENERAL BOX
PATTERN 1:
BOX 1
PATTERN 2:
BOX 2
PATTERN 3:
BOX 3
Each box is accessed by calling the number of its ringing pattern. For example, if a
caller dials the number corresponding to ringing pattern 2, the answering machine
will answer, the outgoing message for Box 2 will play, and the caller can then leave
a message in Box 2. Fax transmissions can be received with any of the ringing
patterns.
2-18
INITIAL SETTINGS
Advertisement
Table of Contents
