Sharp UX-1300 Operation Manual page 20

To have your name and fax/telephone number (called the "Sender's name" and
"Senders number") printed at the top of every page you transmit, program them by
pressing the panel keys as shown below.
# You must program your name and fax number in order to comply with the
Consumer Protection Act of 1991 (see inside of front cover).
@ Ifyou enter an incorrect number or letter, press the HOLD/SEARCH key to
move the cursor back to the mistake, then enter the correct number or letter. (To
move the cursor forward, press the SPEAKER key.)
1 FUNCTION Press the keys shown at left. "ENTRY
MODE' will appear in the display.
Press the "#" key 2 times. "OWN NUM-
BER SET" will appear in the display.
Press the START key.
Enter your fax number (max. of 20 dig-
its) by pressing the number keys. (To in-
sert a space between digits, press the
"#" key. To insert a "+", press the "%*"
key.)
Press the START key.
Enter your name by pressing the appro-
priate number keys as shown on the fol-
lowing page. Press each key repeatedly
until the desired letter appears in the dis-
play. (Max. of 24 characters.)
(Example: "SHARP")
4 ( S TOE Press the START key and then the
STOP key.
2-4 INITIAL SETTINGS