Sharp UX-1300 Operation Manual page 82

Your fax has a memory which can be used to temporarily store both incoming and
outgoing documents.
# When no voice messages (including outgoing messages) have been recorded,
approximately 34 pages of average content can be held in memory if they are all
going to be transmitted (24 pages if Option Setting 16 is set to YES), or 31
pages if they are all received (29 pages if Option Setting 16 is set to YES). Less
pages can be held if any were scanned using fine or halftone resolution.
Sending documents from memory
With this function, the original document is scanned immediately, stored in memory,
and then transmitted once the connection to the receiving machine is made. This is
convenient when transmitting to places where the line is often busy, as it saves you
from waiting to pick up the original document and frees the feeder for other
operations. After transmission, the document will be cleared from memory.
@ Only one memory transmission can be set at a time.
@ The amount of memory currently occupied appears as a percentage in the
display while the document is being scanned.
1 Load the document(s).
e Set the resolution and/or contrast if de-
sired.
2 MEMORY Press the MEMORY key and then "1".
3 Enter the number of the receiving ma-
chine using one of the following methods:
e Press a Rapid Key.
e Press the SPEED DIAL key and enter
a Speed Dial number.
e Enter a full telephone number by
(Example)
pressing the number keys.
7-6 SPECIAL FUNCTIONS