Sharp UX-1300 Operation Manual page 81

The Anti Junk Fax function allows you to block reception of faxes from parties
which you specify. This saves paper by not printing out unwanted "junk" faxes.
To use this function, first turn it on by setting Option Setting 11 to YES as described
in Chapter 8, and then enter the fax numbers from which you do not want to receive
faxes as shown below. If you are using the Caller ID function as described in the
previous section, you can also enter voice numbers.
Comments:
@ Upto 5 numbers can be entered in the Anti Junk Number List.
@ The Anti Junk function will not operate for a number which has also been stored
as a Priority Call or Direct Call number.
® Toclear a number from the Anti Junk Number List, you need to know the 1-digit
number which identifies it. If you have forgotten this number, print out the Anti
Junk Number List as described in Chapter 7.
1 FUNCTION Press the keys shown at left. "STORE
JUNK FAX #" will appear in the display.
2 Press "1" to store a number in the Anti
Junk Number List, or "2" to clear a num-
ber from the list.
3 Storing: Enter a 1-digit number from "1"
to "5". This number identifies the
fax/voice number you will store in the
next step.
(Example) Clearing: Enter the number which iden-
tifies the fax/voice number you want to
clear, and go to Step 5.
Enter the fax/voice number (max. of 20
digits).
Press the START key.
6
Return to Step 3 to enter (or clear) an-
Step 3 or
. other number, or press STOP to exit.
SPECIAL FUNCTIONS 7-5