Features & Specifications - Joerns EasyCare Bed User & Service Manual

Features and Specifications
Standard Features
• Sleep Surface:
• Fixed Width 35" x 80"
• Integrated Width 35" - 42" x 80"
• Travel Range: 7" to 30"
• AdvanceCare 5-Function Control with 30°/45° Care
Pauses, Comfort Chair, and AutoTransfer Height
• On-Pendant Lockout Indicators
• Locking System with Heavy-Duty Casters:
• Roll-in-Low Lock System
• Care-Lock Roll at any Height Mobility
• Pendant Jacks on both left and right side
• Whisper Quiet DC Actuators
• Welded Tubular Frame
• Grid Sleep Surface
• SoftTone Frame Color
• Baseboard Bumper
• Wide Stable Base
• Mattress Stops
• Patented Lifting Mechanism (US Patent 6473922)
• EasyLift Leg Positioner
Accessories And Options
• 80" and 84" Joerns Mattresses
®
• 4" and 8" Length Extensions
• Joerns Bed Panels
• F18 SoftCare ½ Length Assist Device Set
• F14SC Assist Device Set
• F025 Assist Handle
• F026 Assist Device
• F028 Deluxe Assist Device
• Staff Control with Lockout and Underbed Light Control
• Programmable Gravity Assist, Trendelenburg,
AutoTransfer Height
• Programmable SafeLight underbed light
(3 intensities)
• IV Rod
• Floor Mat
• On-Board Battery Back-up Accessory
• Drainage Bag Holder
I.D. Label Symbol Definition
Attention
Consult accompanying documents
Safe Working Load
Maximum Patient Weight
Type B Applied Parts, user controls, mattress,
support platform
Protective Earth (ground)
Pinch Point
Electrical Specifications
Voltage: 100-240 VAC
Frequency: 50/60 Hz
Power: 420 VA
Classification: Class I, Type B
Mode of Operation: 10% Maximum Duty Cycle
2 minutes on/18 minutes off
Circuit Protection: Auto Reset Current Sensor
Standby/Sleep Power: 0.5W
Environmental Conditions
Operating Conditions:
Ambient Temperature: +10°C to +35°C
Relative Humidity: 30% to 75% Non-Condensing
Atmospheric Pressure: 700 hPa to 1060 hPa
Protected Against Splashing Water: IPX4
Storage and Shipping Conditions:
Ambient Temperature: -40°C to +70°C Relative
Humidity: 10% to 100%
Atmospheric Pressure: 500 hPa to 1060 hPa
Bed Identification Numbers
When ordering parts or when contacting our Customer
Care Department, please include the bed's model,
product and serial numbers, found on the identification
labels. The identification labels are located on bed
frame under the sleep deck foot section.
Conforms To:
AAMI STD ES60601-1
IEC STD 60601-1
IEC STD 60601-2-52
Certified To CSA STD C22.2 # 60601-1
Mechanical Specifications
Description:
80" ......................................84.25"L x 35.0"W x 7.65"H
Weight
Roll-in-Low .................................... 220 lbs. (99.8 kg)
Roll at any Height ........................ 230 lbs. (104.3 kg)
Care-Fit Integrated Width ................. +40 lbs. (18.1 kg)
Maximum Back Angle .........................65° to horizontal
Maximum Knee Angle ........................35° to horizontal
Maximum Knee To Leg Angle ................................. 45°
Minimum Height Mattress Support Surface
Roll-in-Low ........................................................7.00"
Roll at any Height ..............................................7.65"
Maximum Height Mattress Support Surface
Roll-in-Low ......................................................30.00"
Roll at any Height ............................................30.65"
Safe Working Load ............................ 600 lbs. (272 kg)
Maximum Patient Weight ................... 550 lbs. (249 kg)
Joerns® Bed Frames
EasyCare®
Dimensions:
©2023 Joerns Healthcare • 6110444 RevA • 000547
5