Table of Contents
Advertisement
Joerns® Bed Frames
Chauffeur™
Features and Specifications
Standard Features
•
Designed to work exclusively with select
Joerns beds
•
Low speed to allow for maneuvering in tight
spaces and bed movement, and high speed
for transport
•
When installed on a Joerns bed, the overall height
of the bed with a patient helper is designed to fit
through a standard door opening
•
Emergency Stop on the operating control handle
for safety
•
Hi-capacity battery system
•
On-board charging system that only requires the
unit's power cord to be plugged into a hospital
grade outlet for re-charging
•
Battery charge level indicator prominently placed
on the operating control handle
•
Horn on the operating control handle
•
Non-pneumatic tire that will never go flat
•
Uncluttered surfaces for ease of cleaning
•
Brake release to allow the unit to be manually
moved should the batteries lose charge
Specifications
Under Bed Clearance ............................... 2 - 4 inches
Hoyer
Handle Height ........................... 37 - 41 inches
®
Capacity......................................................... 1750 lbs
Weight ............................................................. 130 lbs
Drive Wheel ................................................... 4 inches
Ground Speed (SLOW) .................................. .7 mph*
Ground Speed (FAST) .................................. 1.6 mph*
Braking
• Regenerative braking to stop, holding brake once
unit has stopped.
Range (fully charged)
• 3 miles (Variances in battery conditions, load on
the bed, and terrain conditions may result in actual
distances that differ)
*Depending on battery condition.
4
© 2016 Joerns Healthcare • 6110347 RevA • 16-2857
Electrical Specifications
Batteries
• 2 – 24 VDC, 35 amp-hour capacity
Battery Charger
• Input Voltage– 120 VAC +/-10% or 230 VAC
+/-10% (per model)
• Input Frequency Range – 47 to 63 Hz
• Input Current – 5.0 Amp (max) @ 120 VAC,
2.5 Amp (max) @ 230 VAC
• Output Voltage – 28.5 to 29.1 VDC
• Output Current – 10.8 to 13.2 Amp
Operating Instructions
When used properly, the Joerns Chauffeur allows the
user to safely move and maneuver the Joerns Bari10A
bed and select other bed frames. Read and thoroughly
understand this user manual before operating the
Chauffeur. If possible, have the Chauffeur available to
review when going through this manual.
Joerns recommends becoming familiar with the
operation of the Chauffeur first with an empty Bari10A
in a large open area on a flat surface free of obstacles.
When using the Chauffeur, always be aware of your
surroundings, operate the unit slowly and cautiously.
Avoid collisions which may injure the patient/
caregivers/nearby people, cause damage to the
facility, or cause damage to the bed or Chauffeur.
Be courteous of others and use the horn to let your
presence be known.
Anticipate and avoid unsafe situations. Be especially
cautious when using the Chauffeur on sloped surfaces.
The Chauffeur is designed for use on ADA approved
1:20 sloped surfaces.
Advertisement
Table of Contents
