Features And Specifications - Joerns WeCare Bed User & Service Manual

Features and Specifications

Joerns® WeCare™ Bed
Standard Features
80" Mattress Support Platform
8" to 28" Travel Range
Quiet DC Actuators
Welded Tubular Frame
Grid Sleep Surface
Wide Stable Base
SoftTone Frame Color
Heavy-Duty Casters
Locking System:
• Roll-in-Low Lock System
• Roll at any Height Mobility
Baseboard Bumper
Mattress Stops
Electrical Specifications
Power: 120V
Frequency: 60Hz
Current Rating: 4.8 Amps
Classification: Class I, Type B
Mode of Operation: 10% Maximum Duty Cycle
2 minutes on/18 minutes off
Circuit Protection: Auto reset current sensors
Environmental Conditions
Operating Conditions:
Ambient Temperature: +10°C to +35°C
Relative Humidity: 30% to 75% Non-Condensing
Atmospheric Pressure: 700 hPa to 1060 hPa
Protected Against Splashing Water IPX4
Storage and Shipping Conditions:
Ambient Temperature: -40°C to +70°C
Relative Humidity: 10% to 100%
Atmospheric Pressure: 500 hPa to 1060 hPa
Bed Identification Numbers
When ordering parts or when contacting our
Customer Care Department, please include the
bed's model and serial numbers found on the
identification label. The identification label is
located on bed frame under the mattress support
platform foot section.
Accessories and Options
Staff Control
80" Joerns Mattresses
F14 Assist Device Set
F025 Assist Handle
F026 Assist Device
F028 Deluxe Assist Handle
F168 3/4 Length Assist Device (requires mounting kit)
IV Rod
Floor Mat
Bed Transport Bar
4" Length Extension
Comfext Width Extension Kit
Patient Helper and Adapter
On-Board Battery Back-up Accessory
Mechanical Specifications
Description:
80" Model .............................86.9"L x 35.0"W x 8.75"H
Weight - Total without Panels .............. 145 lb (65.8 kg)
Weight - Head Frame .........................67.3 lb (30.5 kg)
Weight - Foot Frame ...........................77.7 lb (35.2 kg)
Maximum Back Angle .........................65° to horizontal
Maximum Knee Angle.........................25° to horizontal
Maximum Height Mattress
Support Platform................................. 28" Above Floor
Minimum Height Mattress
Support Platform................................... 8" Above Floor
Safe Working Load ............................450 lb (204.1 kg)
Maximum Patient Weight ...................400 lb (181.4 kg)
Conform To:
AAMI STD ES60601-1
IEC STD 60601-1
IEC STD 60601-2-52
Certified to CSA STD C22.2 # 60601-1
I.D. Label Symbol Definition
Attention
Consult accompanying documents
Safe Working Load
Maximum Patient Weight
Type B Applied Parts, user controls, mattress,
support platform
Class II Equipment
Protective Earth (ground)
Pinch Point
Joerns® Bed Frames
WeCare™ Bed
Dimensions:
© 2022 Joerns Healthcare • 6110435 RevC • 22-2083
5