Testing Fall Alert; Exiting Fall Alert; Reinitiating Fall Alert; Secure Operations - Motorola APX 5000 1 User Manual

7.13.2

Testing Fall Alert

Prerequisites: Ensure that Fall Alert feature is configured in your radio.
Procedure:
1 Turn on the radio, and place it in a vertical position for at least 5 seconds.
2 Lay the radio down in a horizontal position.
The radio plays an alert tone and the display shows Man-Down.
Postrequisites: If Fall Alert is configured but the condition does not trigger the activation of the
feature, send the radio to a qualified technician.
7.13.3

Exiting Fall Alert

Procedure:
To exit Fall Alert mode, press Clr.
7.13.4

Reinitiating Fall Alert

Procedure:
To reinitiate Fall Alert after exiting Emergency Operation, perform one of the following actions:
• Return the radio to a vertical position.
• If motion sensitivity is enabled, shake the radio.
7.14

Secure Operations

Secure radio operation provides the highest commercially available level of voice security on both
trunked and conventional channels.
By default, the radio automatically enters the encrypted environment without having to manually select
or clear the secure transmission.
7.14.1

Selecting Secure Transmissions

Procedure:
Turn the preprogrammed Secure/Clear switch to the secure position.
• If the selected channel is preprogrammed for clear-only operation, when you press the PTT
button, you hear an invalid mode tone and the display shows CLR TX.
• The radio does not transmit until you set the Secure/Clear switch to the clear position.
• If the "Ignore Secure/Clear Switch when Strapped" programming option is enabled, the radio
transmits without displaying any messages in the strapped mode of operation, regardless of
the Secure/Clear switch setting. This option must be preprogrammed by a qualified radio
technician.
• The Secure/Clear switch only applies when the radio is transmitting.
68012002066-HU
Chapter 7 : Advanced Features
57