Before Use; Charge The Battery; Attach The Belt Clip - Hytera AP32 Series User Manual

User Manual

3. Before Use

3.1 Charge the Battery

 Read the Safety Information Booklet before charging.
 The remaining lithium-ion battery power is limited to 30% pursuant to the new lithium battery shipment
regulation approved by the International Air Transport Association (IATA).
Use the USB Type-C cable to connect the radio with battery attached to the power adapter, power bank, or PC.
You can learn the charging status through the LED indicator.
LED Indicator
Glows red
Flashes red once every 1s
Glows green

3.2 Attach the Belt Clip

Align the holder on the belt clip with the groove on the battery, and then press the belt clip downwards into place.
You can press and hold the belt clip spring plate and push the belt clip upwards to remove it.
The battery is being charged.
The battery fails to be charged.
The battery is fully charged.
5
Charging Status
Before Use