Volvo Penta TAD1360VE Operator's Manual page 92

Technical Data
Declaration for the installation of partially-completed machinery in accordance with
Machinery Directive 2006/42/EC, Annex II, 1B and Supply of machinery (Safety) Regulations 2008
Engine Manufacturer:
AB Volvo Penta
Gropegårdsgatan, SE 405 08 Gothenburg, Sweden
Description of engine 4-cycle diesel engine. Engine types covered by this declaration:
TAD1140VE TAD1340VE
TAD1141VE TAD1341VE
TAD1142VE TAD1342VE
TAD1150VE TAD1343VE
TAD1151VE TAD 1344VE
TAD1152VE TAD1345VE
TAD1170VE TAD1350VE
TAD1171VE TAD1351VE
TAD1172VE TAD1352VE
TAD1180VE TAD1353VE
TAD1181VE TAD1360VE
TAD1182VE TAD1361VE
TAD1183VE TAD1362VE
TAD1363VE
TAD1364VE
TAD1365VE
Fundamental health and safety requirements applied to, and fulfilled by, the above-mentioned engines are
described in the following items in Annex I:
1.1.3, 1.1.5, 1.5.1, 1.5.2, 1.5.3, 1.5.4, 1.5.6, 1.5.13, 1.6.1, 1.6.2, 1.6.4, 1.7.1, 1.7.1.1, 1.7.1.2, 1.7.4, 1.7.4.1 and
1.7.4.3.
The relevant technical documentation is compiled as described in part B of Annex VII.
Relevant information concerning the partially completed machinery will be provided in suitable form upon justified
requests from competent national authorities. The individual authorized to compile the relevant technical
documentation is the signer of this declaration.
The harmonized standards applied are:
EN ISO 12100:2010: Safety of machinery – General principles for design – Risk assessment and risk reduction.
EN 1679–1+A1:2011: Reciprocating internal combustion engines – Safety – Part 1: Compression ignition engines.
The partially completed machinery also complies with the following relevant Directive:
2014/30/EU – Electromagnetic Compatibility (EMC) Directive.
Applied standards: EN 61000–6–1:2007, EN 61000–6–2:2005, EN 61000–6–3:2007, EN 61000–6–4:2007, EN
12895:2015 + A1:2019, EN-ISO 14982:2009 and EN 13766-1:2018.
For engines equipped with the Volvo Penta Start/Stop System the responsibility for the functional safety of the
system lies with the machine manufacturer performing the integration.
The engines covered by this declaration may not be put into operation before the completed machinery into which
they are to be installed has been declared to conform with the provision of Machinery Directive 2006/42/EC and
Supply of machinery (Safety) Regulations 2008.
Name and function:
Fredrik Berggren, Safety Compliance
(The identity of the individual authorized to sign on behalf of the
engine manufacturer or the latter's authorized representative.)
Date and place of issue: (yyyy-mm-dd) 2021–05–31
Gothenburg
90
TAD1341GE-B TAD1380GE
TAD1342GE-B TAD1381GE
TAD1343GE-B TAD1382GE
TAD1344GE-B TAD1381VE
TAD1345GE-B TAD1382VE
TAD1350GE TAD1383VE
TAD1351GE TAD1384VE
TAD1352GE TAD1385VE
TAD1353GE
TAD1354GE
TAD1355GE
TAD1371VE
TAD1372VE
TAD1373VE
TAD1374VE
TAD1375VE
TAD1640VE-B TAD1640GE-B
TAD1641VE-B TAD1641GE-B
TAD1642VE-B TAD1642GE-B
TAD1643VE-B TAD1650GE
TAD1643VE TAD1651GE
TAD1650VE TWD1643GE
TAD1650VE-B TWD1644GE
TAD1651VE TWD1645GE
TAD1660VE TWD1652GE
TAD1661VE TWD1653GE
TAD1662VE TWD1672GE
TAD1670VE TWD1673GE
TAD1671VE TWD1683GE
TAD1672VE TWD1683GE-B
TWD1683VE
Signature and title:
47711155 06-2021 © AB VOLVO PENTA
Phoenix no. 50334799