Table of Contents
Advertisement
Instruments and Controls
30
Menus
There are several sub-menus under each main menu.
There is not space for all the menu choices on the
display. To scroll through the menus, use the 7 and 9
buttons on the display. Press the SEL button 8 to make
a selection. Refer to the illustration on the previous
page.
NOTICE! The Setup menu can be used to select the
language that you want to use on the display.
Main menu
•
Engine data, current engine data
•
Preheat, manual activation of pre-heating. Must be
activated with temperatures below 0°C (32°F)
•
Governor mode, activation of droop
•
Diagnostics, shows fault codes as text
•
Trip reset, resets trip data
•
Setup, parameter setting
•
Information, shows the currently applicable hard/
software, data sets and engine identification for the
engine and DCU data
Engine data
shows relevant engine data.
•
Engine speed, can be controlled with the SPEED+
and SPEED– buttons (rpm)
•
Charge pressure (kPa)
•
Coolant temperature (°C)
•
Charge air temperature (°C)
•
Oil pressure (kPa)
•
Oil temperature (°C)
•
Engine hours (h)
•
Battery voltage (V)
•
Fuel consumption (l/h)
•
Instantaneous fuel consumption (trip fuel) (l)
47711155 06-2021 © AB VOLVO PENTA
Advertisement
Table of Contents
