Axis C1511 User Manual page 36

AXIS C15 Series
The web interface
Tools
• Check: Check for errors on the SD card. This only works for the ext4 file system.
• Repair: Repair errors in the ext4 file system. To repair an SD card with the VFAT file system, eject the SD card, insert it
in a computer, and perform a disk repair.
• Format: Format the SD card, for example, when you need to change the file system or quickly erase all data. VFAT
and ext4 are the two available file system options. The recommended format is ext4, due to its resilience against
data loss if the card is ejected or if there is an abrupt power loss. However, you need a third-party ext4 driver or
application to access the file system from Windows®.
• Encrypt: Use this tool to format the SD card and enable encryption. Encrypt deletes all data stored on the SD card.
After using Encrypt, the data that's stored on the SD card is protected using encryption.
• Decrypt: Use this tool to format the SD card without encryption. Decrypt deletes all data stored on the SD card. After
using Decrypt, the data that's stored on the SD card is not protected using encryption.
• Change password: Change the password required to encrypt the SD card.
Use tool: Click to activate the selected tool.
Wear trigger: Set a value for the SD card wear level at which you want to trigger an action. The wear level ranges from 0–200%.
A new SD card that has never been used has a wear level of 0%. A wear level of 100% indicates that the SD card is close to
its expected lifetime. When the wear-level reaches 200%, there is a high risk of the SD card malfunctioning. We recommend
setting the wear trigger between 80–90%. This gives you time to download any recordings as well as replace the SD card in
time before it potentially wears out. The wear trigger allows you to set up an event and get a notification when the wear
level reaches your set value.
ONVIF
ONVIF accounts
ONVIF (Open Network Video Interface Forum) is a global interface standard that makes it easier for end-users, integrators,
consultants, and manufacturers to take advantage of the possibilities offered by network video technology. ONVIF enables
interoperability between different vendor products, increased flexibility, reduced cost and future-proof systems.
When you create an ONVIF account, you automatically enable ONVIF communication. Use the account name and password for all
ONVIF communication with the device. For more information see the Axis Developer Community at axis.com.
Add accounts: Click to add a new ONVIF account.
Account: Enter a unique account name.
New password: Enter a password for the account. Passwords must be 1 to 64 characters long. Only ASCII printable characters
(code 32 to 126) are allowed in the password, for example, letters, numbers, punctuation, and some symbols.
Repeat password: Enter the same password again.
Role:
• Administrator: Has full access to all settings. Administrators can also add, update, and remove other accounts.
• Operator: Has access to all settings except:
-
-
• Media account: Allows access to the video stream only.
The context menu contains:
Update account: Edit the account properties.
Delete account: Delete the account. You can't delete the root account.
ONVIF media profiles
All System settings.
Adding apps.
36