Axis C1511 User Manual page 34

AXIS C15 Series
The web interface
-
-
-
-
DTMF
Add sequence: Click to create a new dual-tone multifrequency (DTMF) sequence. To create a rule that is activated by
touch-tone, go to Events > Rules.
Sequence: Enter the characters to activate the rule. Allowed characters: 0–9, A-D, #, and *.
Description: Enter a description of the action to be triggered by the sequence.
Accounts: Select the accounts that will use the DTMF sequence. If you choose peer-to-peer, all peer-to-peer accounts will share
the same DTMF sequence.
Protocols
Select the protocols to use for each account. All peer-to-peer accounts share the same protocol settings.
Use RTP (RFC2833): Turn on to allow dual-tone multifrequency (DTMF) signaling, other tone signals and telephony events in
RTP packets.
Use SIP INFO (RFC2976): Turn to include the INFO method to the SIP protocol. The INFO method adds optional application layer
information, generally related to the session.
Test call
SIP account: Select which account to make the test call from.
SIP address: Enter a SIP address and click
Multicast controller
User multicast controller: Turn on to activate multicast controller.
Audio codec: Select an audio codec.
Source: Add a new multicast controller source.
• Label: Enter the name of a label that is not already used by a source.
• Source: Enter a source.
• Port: Enter a port.
• Priority: Select a priority.
• Profile: Select a profile.
• SRTP key: Enter an SRTP key.
The context menu contains:
Edit: Edit the multicast controller source.
Delete: Delete the multicast controller source.
View area: Select the view area to use for video calls. If you select none, the native view is used.
Resolution: Select the resolution to use for video calls. The resolution affects the required bandwidth.
Frame rate: Select the number of frames per second for video calls. The frame rate affects the required
bandwidth.
H.264 profile: Select the profile to use for video calls.
to make a test call and verify that the account works.
34