Electrolux 7 Series Service Manual page 93

Attachment position of springs to top crosspiece.
13.5 Shock absorber pin
There is a bushing on either end of the shock absorber. It has a wider profile on one end to avoid it becoming dislodged
when the pin is inserted (see the two figures below).
Narrow edge Wide edge
When positioning the shock absorber inside the fastening (situated at the bottom of the cabinet or in the tub), take care
when positioning the bushing, so as to insert the pin from the part of the bushing with the widest profile.
The spare bushing is supplied under code 344 91 25-30/5
If you are having difficulty inserting the pin, grease it a little (code 5026 24 16-00/6).
2010 dmm 93/96 599 73 68-54