Electrolux 7 Series Service Manual page 12

•
Button no. 5: OPTION
This button is related to LED (L2), and performs the option of:
− Extra rinse
Press this button to enable/disable the option related to it, with the
respective lighting/turning off of the LED. At the same time, the
programme time is updated (via the three digits).
•
Button no. 6: OPTION
This button is related to LED (L3), and performs the option of:
− Time Save
Press this button to enable/disable the option related to it, with the
respective lighting/turning off of the LED. At the same time, the
programme time is updated (via the three digits).
The following options can also be configured in appliances:
− Time Save: with two levels, corresponding to: Daily and Super Quick. Press it once to perform the Daily
function. The related LED lights. Press it twice to perform the Super Quick function. The related LED stays on
and the three digits simultaneously vary the cycle time.
− Stains and HOT and COLD Water are alternative options of the same button.
− When a solenoid valve for hot water is fitted, the related option is also configured.
•
Button no. 7: DELAYED START
This button is configurable and has the DELAYED START
function. During the programme selection phase, a delayed start
can be selected, from 30' to 20 hours (30'
2h 3h... 20h
during the last hour, the time decreases one minute at a time.
To cancel the delayed start time, after the cycle has started,
pause the washing machine using the START/PAUSE button
and cancel the option.
•
Button no. 8: START/PAUSE
This button is used to START the appliance or PAUSE it.
It is related to LED L4, which flashes when the appliance is on
pause, whereas it is lit continuously when the appliance is
performing a washing cycle.
2010 dmm
60'
0h) and the time is shown on the Display;
90'
12/96
599 73 68-54