13.2.4 Display board/light diffuser/buttons springs/buttons
Remove the worktop (see relevant paragraph).
Remove the control panel (see relevant paragraph).
Remove the screws and release the hooks which secure the PCB
assembly to the control panel.
The knob and knob cover remain secured to the control panel.
•
Buttons spring
Detach it from the control panel and pull it out of the two side pins.
•
Light diffuser
Release the three hooks securing it to the control panel
•
Buttons
The buttons have a number printed on them. See the figure for the numbering.
•
Selector light diffuser
To remove it, release the hooks securing it to the control panel
When reassembling the display board assembly to the control panel,
Remove the knob from the knob cover.
Release the hooks fastening one to the other, all secured to the control panel.
2010 dmm
78/96
599 73 68-54