Sub-Zero 648PRO User Manual page 9

S U B - Z E R O P R O 4 8 U S E & C A R E
F R E E Z E R S T O R A G E
A D J U S T A B L E S H E L V E S
The adjustable shelves of the PRO 48 upper
freezer compartment are cantilevered and
100% stainless steel.
The freezer shelves are repositioned the same
way as the glass shelves in the refrigerator
compartment. To remove or adjust the freezer
shelves, first tilt the shelf up at the front, then
lift it up and out of the tracks on the rear wall
of the freezer.
To replace a shelf, insert in the tracks on the
rear wall of the freezer with the front of the
shelf raised slightly. As you push the shelf in,
lower the front of the shelf until it locks into
position.
I C E B U C K E T R E M O V A L
The automatic ice maker and stainless steel ice
bucket are located in the lower freezer drawer.
To remove the ice bucket, pull the freezer
drawer out until it stops, lift the ice bucket up
and out of the drawer. The entire lower freezer
drawer can now be used for more ice storage
if necessary.
Storage drawer removal
S T O R A G E D R AW E R R E M O VA L
The refrigerator and freezer storage drawers
are removable for cleaning. The drawers have
an automatic stop built in to prevent drawers
from coming all the way out of the unit.
To remove, pull the drawer all the way out
until it stops, lift up evenly on both sides of the
drawer front and pull out. To reinstall, raise the
front of the drawer and place onto the drawer
slide tracks. Be sure to engage the front of the
drawer slide with the drawer assembly. Refer
to the illustration of the storage drawer
removal below.
IMPORTANT NOTE: To reduce the weight of
the drawer, be sure to unload the contents
before removing the drawer.
Storage drawers are heavy. Be sure to
keep your feet clear as you remove the
drawer.
9