Sub-Zero 648PRO User Manual page 8

S U B - Z E R O
R E F R I G E R AT O R
A D J U S TA B L E G L A S S S H E L V E S
The adjustable glass shelves of the PRO 48
upper refrigerator compartment are canti-
levered and spill proof with stainless steel
trim.
To remove a shelf, tilt the shelf up at the front,
then lift it up and out of the tracks on the rear
wall of the refrigerator. To replace a shelf,
insert in the tracks with the front of the shelf
raised slightly. As you push the shelf in, lower
the front of the shelf until it locks into position.
Refer to the illustration of the adjustable glass
shelves below.
IMPORTANT NOTE: Always be careful
handling glass shelves to prevent breaking the
glass or scratching the interior.
C R I S P E R L I D A S S E M B LY
The PRO 48 upper refrigerator drawer features
a crisper lid to provide higher humidity in the
drawer compartment. This assembly allows for
easy access to the compartment and has a
clear-view window for visibility of stored
vegetables.
To remove the crisper lid assembly, pull the
upper refrigerator drawer all the way out, raise
the front edge of the crisper lid assembly up
and pull out from the back. Refer to the illus-
tration of the crisper lid below.
Adjustable glass shelves
8
P R O 4 8 U S E & C A R E
S T O R A G E
Storage drawer with crisper lid
R E F R I G E R AT O R D R A W E R D I V I D E R S
The PRO 48 refrigerator storage drawers give
you full access to food with adjustable and
removable dividers. The dividers are inter-
changeable between the upper and lower
refrigerator drawer. Two long dividers run the
full depth of the drawer, with shorter dividers
that connect to the long dividers to compart-
mentalize the drawer.
To remove the short dividers, lift up and out of
position from supports on the long dividers
and sides of the drawer. The long dividers can
also be removed by lifting up and out of
position from drawer support tabs. Refer to the
illustration of the storage drawer below.
A D J U S TA B L E S L I D E - O U T B I N S
The PRO 48 features two versatile, adjustable
stainless steel slide-out bins that fit neatly
under any refrigerator compartment shelf. The
glass shelves have integrated rails that make it
possible to position the slide-out bins in a
variety of locations.
To remove the slide-out bin, simply pull the
handle portion of the bin forward until it stops,
lift it up and out of the rails mounted below
the glass shelf. Refer to the illustration of the
adjustable slide-out bin below.
Adjustable slide-out bin