User Manual
XTOXLnie/ XTOXLnce
STATUS MESSAGES
General information about status reports
During operation, tests are continually carried out to determine whether a malfunction has
occurred. If a malfunction is detected, the corresponding status report appears on the display.
The list of messages, complete with their description, is shown in the document "RT578 - Error
messages and troubleshooting".
Warning messages
Warnings inform the operator about the occurrence of a certain event at the printer. The message
is displayed until it is unlocked by the user. If in READY status the printer continues operating
without intervention from the user. If the message appears in MANUAL mode, it must be unlocked
to go to READY mode and allow printing. The status report shown on the display is structured as
follows:
A
A
Alarm icon: press the key below the symbol to unblock the status message.
B
Warning number
C
Warning message
D
Background colour: yellow
E
Help icon: after pressing the icon, a quick troubleshooting guide appear.
F
Pause: it unlocks the message. The message will appear again when the operator comes back
to the main pages.
Error messages
Error messages must be acknowledged by the operator as the triggering event or fault endangers
normal operation. The status report shown on the display is structured as follows:
A
A
Alarm icon: press the key below the symbol to unblock the status message.
B
Error number
C
Error message
D
Background colour: red
Edition 01 - 11/2022
B
C
Figure 72: Warning message
B
Figure 73: Error message
57
D
D
C
E
F
E
H
Operation