User Manual
XTOXLnie/ XTOXLnce
HOW TO STORE LABEL FILES (.LM1)
Insert the memory key containing the label .LM1 files.
Put the printer in MANUAL mode and enter the Parameter Setting.
• Click on "File management" button
• Click on "Copy files".
• Select the origin and destination of the copy, click on "Copy" and wait for command to be run.
The File management menu is only accessible with password, if the menu
levels have been assigned to different users.
HOW TO BACK UP
Insert the memory key on which to store the data.
Put the printer in MANUAL mode and enter the Parameter Setting.
• Click on "File management" button.
• Click on "Back up"
IMPORTANT!
Back up the data after printer installation is complete. Repeat the backup procedure
periodically, in any case after making substantial changes to the parameters and, if possible, in
case of replacement of the Electronic Unit. The backup file name will be similar to:
bkxtoi_L00112.zip where "L00112" is the printer serial number.
Edition 01 - 11/2022
Figure 39: copy files or folders
.
Figure 40: back up
31
Operation