Table of Contents
Advertisement
User Manual
XTOXLnie/ XTOXLnce
Information
NOTES ON THE CORRECT USE OF THE PRINTER
Read these notes together with Chapter "Safety notices" to ensure that the printer is used correctly.
Switching on the printer.
• If the printer has been left in a cold or excessively hot environment for a considerable time, wait
at least 1 hour before switching it on to prevent humidity collecting on the internal circuits.
• After switching off, wait for a few seconds before switching on the printer again.
Use in particularly places
If the printer is going to be used in particularly humid conditions (for example cheese factories) the
protection kits are necessary. Do not use it where there is a lot of oil, iron particles, or dust.
Disposal
The device may not be disposed of with household rubbish. This appliance is labelled in
accordance with European Directive 2012/19/UE concerning used electrical and
electronic appliances (waste electrical and electronic equipment - WEEE).
The guideline determines the framework for the return and recycling of used appliances
as applicable throughout the EU. To return your used device, please use the return and
collection systems available to you.
GENERAL NOTES
Validity of this manual and required compliance
This user manual refers exclusively to the electronic printer for thermal transfer to film named XTO.
It is used for proper operation and adjustment of the printer.
The printer must be properly installed and configured to allow for operation and settings.
For information about installation and maintenance, see the Installation manual.
For technical questions not covered in this operating manual request a service technician.
Technical release
Software version: 2.9
Hardware version: 68XTOXL10A-LH, 68XTOXL10B-RH
These instructions have to be kept for future reference and must be
available throughout the expected life of the product.
Liability and Copyright
All rights to this manual are reserved. This manual may not be reproduced in any form, either wholly
or partially, without the express written authorisation of Eidos Srl. The contents of this manual are
subject to modifications and improvements without prior warning. Every effort has been made to
ensure the accuracy of the contents. If errors and/or inaccuracies are detected, inform Eidos Srl in
order to make the manual as exhaustive as possible. Eidos Srl accepts no responsibility for any
accidental errors or for any damage arising from the supply, scope or use of this manual.
Edition A - 01/2024
2
Information
Advertisement
Table of Contents
