Table of Contents
Advertisement
User Manual
XTOXLnie/ XTOXLnce
Starting and Monitoring a Print Job
The printer starts to print, as soon as the following conditions are met:
•
The display shows the "READY" screen
•
An STA digital input pulse is received
If the printer shows the "MAN" screen:
➔ Press the
key, to toggle to the "READY" screen and to start printing.
CREATION AND SENDING OF THE LABEL WITH EASYCODE
The EIDOS EASYCODE program permits immediate creation of the labels including texts, bar-codes,
lines, boxes and images and also by importing variable data from the customer's Data Base. The
label generated can be sent or copied to the printer.
The variable data can be entered from keyboard, recalled from a data-base at the time of printing,
introduced by the operator on the printer and managed by the customer's program based on the E-
LIB Eidos tool - for more information refer to the EASYCODE software manual -.
Label copy from USB disk to XTOXL flash disk C:
With the EASYCODE software Liv.1 (Demo version) you can create, modify, save labels and copy
them to EIDOS printers via USB Memory or you can transfer the files via ethernet connection to the
XTOXL printer memory (C. disk). The label file will be loaded manually from XTOXL disk.
How to operate
➔ Create the label layout (.LM1 file) using Easycode (version 1st level is sufficient).
➔ Copy the label layout in the Disk C: of the printer via USB key.
Edition 01 - 11/2022
Be careful: the key must be put in
the USB port of the printer, not the
panel.
Figure 36: sending label via USB key
29
Operation
Advertisement
Table of Contents
