Table of Contents
Advertisement
MTS9300A Telecom Power (Ooredoo, Indonesia,
MTS9304A-HD2002)
User Manual
●
Using Ladders
●
●
●
●
●
Issue 06 (2021-10-13)
Do not drag steel ropes and hoisting tools or bump hoisted objects against
hard objects during hoisting.
Use wooden or fiberglass ladders when you need to perform live working at
heights.
When a step ladder is used, ensure that the pull ropes are secured and the
ladder is held firm.
Before using a ladder, check that it is intact and confirm its load bearing
capacity. Do not overload it.
Ensure that the wider end of the ladder is at the bottom, or protective
measures have been taken at the bottom to prevent the ladder from sliding.
Ensure that the ladder is securely positioned. The recommended angle for a
ladder against the floor is 75 degrees, as shown in the following figure. An
angle ruler can be used to measure the angle.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
10
Advertisement
Table of Contents
