Table of Contents
Advertisement
MTS9300A Telecom Power (Ooredoo, Indonesia,
MTS9304A-HD2002)
User Manual
When climbing a ladder, take the following precautions to reduce risks and ensure
safety:
●
●
●
●
Drilling Holes
When drilling holes into a wall or floor, observe the following safety precautions:
Do not drill holes into the equipment. Doing so may affect the electromagnetic
shielding of the equipment and damage components or cables inside. Metal
shavings from drilling may short-circuit boards inside the equipment.
●
●
Moving Heavy Objects
●
●
Issue 06 (2021-10-13)
Keep your body steady.
Do not climb higher than the fourth rung of the ladder from the top.
To climb onto a roof, ensure that the ladder top is at least one meter higher
than the roof line, as shown in the following figure.
Ensure that your body's center of gravity does not shift outside the legs of the
ladder.
NO TICE
Wear goggles and protective gloves when drilling holes.
When drilling holes, protect the equipment from shavings. After drilling, clean
up any shavings that have accumulated inside or outside the equipment.
Be cautious to avoid injury when moving heavy objects.
When moving the equipment by hand, wear protective gloves to prevent
injuries.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
11
Advertisement
Table of Contents
