Mounting The Guide Shaft - GE GL 311 F3/4031 P/VE Operating Instructions Manual

R
ECONDITIONING
10.1.9

Mounting the Guide Shaft

90 / 146
• Insert the interrupter unit (5) and the movable contact system (6)
into the fixed contact (7) so that the shaft holes in the guide levers
(8) and fixed contact (7) are lined up.
• Place the spacer sleeve (21) between the levers.
• Connect the guide lever and fixed contact to the guide shaft (28).
• Coat a new screw (22) with locking adhesive per S1.
• Fasten the shaft with the locking plate (23) and the new screw
(22). Tighten to a torque of 17Nm.
5 Interrupter unit
6 Movable contact system
7 Fixed contact
8 Guide lever
17 Socket head cap screw, M8x12 A2-70
21 Spacer sleeve
23 Locking plate
28 Guide shaft
OI 250 (EN)
6
5
23 22
8
28
21
7
1x
1x
1x
2x
1x
1x
1x
1x
REV7
/REV7