Technical Data - Scheppach OSM100 Translation Of Original Instruction Manual

5. Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Additional safety rules for the oscillating spindle
grinding machines
m
WARNING: Do not use your machine until it is
completely assembled and installed according to the
instructions.
• If you are not familiar with the operation of the sand-
ing machine, ask the head of the department, your
teacher, or any other qualified person.
• ATTENTION: This machine has only been designed
for sanding wood or similar materials. The sanding
of other materials can cause fire, injuries, or dam-
age the product.
• Always wear safety goggles.
• This machine may only be operated indoors.
• IMPORTANT: Mount and use the machine on a
horizontal surface. A non-horizontal surface can
damage the motor.
• If the machine tends to tilt or walk (especially when
sanding long and heavy panels), it must be fastened
to a solid surface of sufficient carrying force.
• Firmly hold the workpiece when sanding.
• Do not wear gloves. Do not hold the workpiece with
a cloth during sanding.
• Never sand workpieces too small to be held safely.
• Avoid awkward hand positions where a sudden slip
could cause your hand to touch the sanding belt
or disc.
• When sanding a large piece of material, provide an
additional support at table height.
• Never sand an unsupported workpiece. Secure the
workpiece with the table or the fence. Exceptions
are the sanding of curved workpieces on the outside
of the sanding disc.
• Always clear the table, fence or sanding belt of
scraps or other objects, before turning the machine
on.
• Do not perform any layout assembly or set-up work
on the table while the sanding machine is in op-
eration.
• Switch the machine off and pull the power plug from
the socket when fitting or removing accessories.
• Never leave the working area of the sanding ma-
chine while the tool is running, or as long as it has
not come to an absolute standstill.
• Always place the work piece on the grinding table.
To sharpen bent tools with the grinding disc, place
them securely on the table.
Warning! This electric tool generates an electromag-
netic field during operation. This field can impair active
or passive medical implants under certain conditions.
In order to prevent the risk of serious or deadly in-
juries, we recommend that persons with medical
implants consult with their physician and the manu-
facturer of the medical implant prior to operating the
electric tool.
7.

Technical Data

Dimensions L x W x H
RPM
Table size
Table height
oscillation stroke
grinding height max.
ø spindle
vacuum connector ø
Weight
Motor V~/Hz
Input W
Operating mode
Subject to technical changes!
*S1: Continuous operation with constant load
Noise
The noise values have been determined in accordance
with EN 62841.
Sound pressure level L
Uncertainty K
Sound power level L
Uncertainty K
www.scheppach.com
400 x 365 x 440 mm
370 x 290 mm
pA
pA
WA
WA
2000 min
-1
330 mm
16 mm
98 mm
12,7 mm
38 mm
13,5 kg
220–240/50
450
S1
96.8 dB(A)
3 dB
109.8 dB(A)
3 dB
GB | 21