Residual Risks; Technical Data - Scheppach DG150GP Translation Of Original Instruction Manual

• Only true the grinding disc on the front side. Grind-
ing on the side surfaces can make the grinding disc
too thin for safe use.
• Grinding generates heat. Do not touch the work-
piece until it has cooled down sufficiently.
• Only use grinding discs that are designed for safe
use on the bench grinder. Do not use a grinding disc
whose specified maximum rotational speed is lower
than the speed specification of the device.
• Do not use any damaged or deformed grinding
wheels or brushes.
• Only use grinding wheels and brushes marked with
a rotational speed which is at least as high as the
speed indicated on the rating plate of the electrical
tool.
• Always leave the brush fastened to the spindle in
order to limit the risk of contact with the rotating
spindle.

6. Residual risks

The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the "Safety infor-
mation" and the "Proper use" together with the oper-
ating manual as a whole are observed.
• Avoid accidental starting of the machine: the op-
erating button may not be pressed when inserting
the plug in an outlet. Use the tool attachment that
is recommended in this operating manual. This is
how to ensure that your machine provides optimum
performance.
• Keep your hands away from the work area, when the
machine is in operation.
24 | GB
7.

Technical data

Motor
Rated input
Idle speed
Dimensions
Max. disc Ø
Min. disc Ø (after wear)
Max. brush Ø
Min. brush Ø (after wear)
Disc hole
Disc width
Brush width
Work lamp
Weight approx.
Technical changes reserved!
Duty cycle:
The duty cycle S2 10 min (short-time duty) states that
the engine may only be continuously loaded with the
rated power (400W) for the time specified on the data
plate (10 min). Otherwise, it would heat up impermis-
sibly. During the pause, the motor cools down again
to its initial temperature.
Noise and vibration
The noise and vibration levels have been determined
in accordance with EN 62841.
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.
Noise data
Sound power level L
Sound pressure level L
Uncertainty K
www.scheppach.com
230 - 240 V~ / 50 Hz
S2 10 min: 400 W
380 x 210 x 280 mm
LED with battery (2x)
90.5 dB(A)
WA
77.5 dB(A)
pA
3 dB
wa/pA
S1: 250 W
2980 rpm
Ø 150 mm
Ø 110 mm
Ø 150 mm
Ø 120 mm
Ø 12.7 mm
20 mm
13 mm
7.5 kg