Siemens SIMATIC ET 200AL System Manual page 15

1.4.3 S7 Failsafe Configuration Tool (S7-FCT)
SIMATIC S7-FCT
Failsafe Configuration Tool (FCT) enables you to GSD configure the following devices in third-
party engineering systems:
• Selected, functionally fail-safe SIMATIC I/O devices
• Functionally fail-safe SIRIUS ACT PROFINET interfaces
The engineering system must meet the following requirements for this:
• Support of the CPD system integration acc. to "PROFIsafe - Profile for Safety Technology on
PROFIBUS DP and PROFINET IO"
• TCI implementation to Conformance Class C3
Additional information on S7-FCT can be found on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109762827).
1.4.4 SIMATIC Technical Documentation
Additional SIMATIC documents will complete your information. You can find these
documents and their use at the following links and QR codes.
The Industry Online Support gives you the option to get information on all topics. Application
examples support you in solving your automation tasks.
Overview of the SIMATIC Technical Documentation
Here you will find an overview of the SIMATIC documentation available in Siemens Industry
Online Support:
Watch this short video to find out where you can find the overview directly in Siemens
Industry Online Support and how to use Siemens Industry Online Support on your mobile
device:
Distributed I/O system
System Manual, 12/2023, A5E31861578-AL
Industry Online Support International
(
https://support.industry.siemens.com/cs/ww/en/view/109742705
Quick introduction to the technical documentation of automation products per
video (
https://support.industry.siemens.com/cs/us/en/view/109780491
YouTube video: Siemens Automation Products - Technical Documentation at a
Glance (
https://youtu.be/TwLSxxRQQsA
)
Introduction
1.4 ET 200AL Guide
)
)
15