Siemens SIMATIC ET 200AL System Manual page 130

Technical specifications
13.1 Marks and approvals
Marks and approvals on the nameplate
The following overview provides information about the possible marks and approvals. Only
the marks and approvals specified on the nameplate apply to the module.
You can find the associated certificates for download on the Internet. See also: ET 200AL
approvals (https://support.industry.siemens.com/cs/ww/en/ps/14245/cert)
CE marking
The ET 200AL distributed I/O system fulfills the requirements and protection targets of the
following directives and complies with the harmonized European standards (ES) which have
been promulgated for programmable logic controllers in the official gazettes of the European
Community:
• 2014/30/EU "Electromagnetic Compatibility" (EMC Directive)
• 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and
electronic equipment" (RoHS Directive)
The fail-safe modules of the ET 200AL distributed I/O system meet the safety requirements
and safety objectives of the following EU directives and comply with the harmonized EU
standards (EN) for programmable controllers as specified in the official journals of the
European Union.
• 2014/30/EU "Electromagnetic Compatibility" (EMC Directive)
• 2006/42/EC "Machinery Directive and Supplementary Directive 95/16/EC"
• 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and
electronic equipment" (RoHS Directive)
The EC Declarations of Conformity are available for the responsible authorities and are kept at
the following address:
SIEMENS AG
Digital Industries
DI FA TI COS TT
P.O. Box 1963
D-92209 Amberg, Germany
130
Distributed I/O system
System Manual, 12/2023, A5E31861578-AL
13